Intermatic T104
If you have a two speed, you will need to get a T106 as well and you can find them in a single unit like the T10604.
Hello,
This year I am looking to add a timer for my pool pump. What is recommended as a simple on/off timer to add and a good source to get them from?
thanks,
Intermatic T104
If you have a two speed, you will need to get a T106 as well and you can find them in a single unit like the T10604.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
I use a regular hot water heater timer. This is only good if you have a place to install it out of the weather.
18x36 IG Vinyl...Jacuzzi Pumpworks (the bane of my existance), VERY small pool biz - Full time Science and Math teacher!
Thank you for the input. One item that I did not mention is that I also have a gas heater. Will the same Intermatic T014 switch recommended previously work? Will it just need the following fireman's switch?
http://www.amazon.com/Intermatic-156...4885677&sr=8-2
A fireman switch would be a good idea and yes, the heater is in series with the fireman switch and the timer.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Bookmarks