+ Reply to Thread
Results 1 to 5 of 5

Thread: Filling pool an it's unlevel...

  1. #1
    Join Date
    Jun 2015
    Location
    Missouri
    Posts
    1

    Default Filling pool an it's unlevel...

    Just started filling our new 22ft pool and there's about 3" of water on one side, 1.5" in the middle, and no water on the other side. Before going any further with filling it should we go ahead and re level the ground under the pool?

  2. #2
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,607

    Default Re: Filling pool an it's unlevel...

    Yes, you must. Your pool will collapse being that much out of level. The maximum you can allow is 1" overall. Water is insanely heavy. If your pool is 4' deep, when full you will have nearly 5 TONS of water in it! That's 2 full-sized SUVs.

    Good luck!
    Carl

  3. #3
    billy777 Guest

    Default Re: Filling pool an it's unlevel...

    Excellent response from Carl. My 20' Intex pool is close to 2" higher on one side than the other and we've not had any issues with it but if I had to do it over I would have spent more time to get it within the 1" as recommended. As Carl said, a 3" differential may pose a problem.

    Quote Originally Posted by Allisonsorg12 View Post
    Just started filling our new 22ft pool and there's about 3" of water on one side, 1.5" in the middle, and no water on the other side. Before going any further with filling it should we go ahead and re level the ground under the pool?

  4. #4
    Join Date
    Jul 2015
    Location
    ga
    Posts
    3

    Default Re: Filling pool an it's unlevel...

    Water will ALWAYS find its on level. Thats what causes floods. You may have low spots in your liner, but a assure you the water does not. Spot NOW .... or U will have a mess.

  5. #5
    Join Date
    Jun 2016
    Location
    FL
    Posts
    3

    Default Re: Filling pool an it's unlevel...

    The most important part is that all the posts are level within 1 inch of each other and you need a laser transit level rented from rental store. The bottom can be a little off but all the tops and bottoms of posts should be within 1 inch.

+ Reply to Thread

Similar Threads

  1. installing pool on unlevel ground need advice
    By mwatson61 in forum Intex-type Pool Setup & Operations
    Replies: 7
    Last Post: 05-02-2014, 09:03 AM
  2. Appropriate Water Level for Unlevel Pool
    By jachol in forum Intex-type Pool Setup & Operations
    Replies: 3
    Last Post: 06-02-2013, 06:43 PM
  3. How to repair an unlevel pool
    By Stevo in forum In-Ground Pool Construction and Repair
    Replies: 2
    Last Post: 06-02-2010, 03:56 PM
  4. Filter/Pump Unlevel - Problems & Questions
    By jmaj43 in forum Pool Equipment & Operations
    Replies: 4
    Last Post: 08-03-2009, 08:46 PM
  5. Is It Normal For New New Ig Vinyl Pool To Be Slightly Unlevel?
    By webfeet in forum In-Ground Pool Construction and Repair
    Replies: 26
    Last Post: 09-12-2006, 10:03 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts