Forum: In-Ground Pool Construction and Repair

When buying this house, I inherited the Pool. And it was fun for a while, even though challenging to maintain. I've been here well over a...

Does anyone have experience with EcoFinish Aqua Brite? It is a thermalplastic pool coating that is supposed to be fade resistant, scratch resistant,...

Has anyone used Ecofinish / Aquabright coating on their pool? It's a sprayed in coating similar to powder coating, but done in one step with a...

Folks, We are at a point now where we need to replace, either completely, or pretty much completely, all our in-ground 30K pool equipment. Much...

So - anyone have any experience using a heat pump in Florida? And/or any recommendations? I have solar panels, which MAYBE give us another month...

So we opened Saturday. Filled it, then overnight it dropped about 2-3 inches. I thought it may be the skimmer lines so I ran off the sump (bottom...

Hello Everyone, I'm having some masonry repair work done on my IGP walls to support a new liner extrusion. The mason is recommending that he build...

I live in NW FL and have an unground pool, that is 5' in deep end, small, approx 7k gallon pool. I live about 1/2 mile from bay water, and am at...

I've coated my pool twice with epoxy paint. Each time, it lasts 3 good years +2 getting progressively more ugly. I am considering tiling it;...

Hello. I am about to replumb my equipment pad and have two questions: 1) I have a 35K gallon inground pool with three 1-1/2" intake lines combined...

Im getting some air in my lines and have a small leak under my Pump and Strainer Housing as shown. 2 years ago i did have a new pump installed. are...

I have seen profesional pool companies using the same glue that comes in vinyl repair kits but in a can like PVC cement comes in. What is that glue...

The standpipe assembly on my American Products 48 ft^2 DE filter cracked. I don't know how but it's over 20 years old and the deck over it fell down...

After 16 years, I have rough spots in my in ground concrete pool. What would work as a quick fix for the worst spots to get me through the summer...

Looking for some suggestions on pipe size for my new pool (20x40, 25,000gal, 2 skimmers, 4 returns, jr slide, 4 deck jets)(ecostar pump, c4030...

Hi We are considering getting an inground pool installed (we are in MA)- have figured out size and generally what we are looking for in a pool and...

I have an older built 16x32 inground pool made up of a concrete/gunite (unsure) bottom floor with a safety ledge and fiberglass wall panels. I have...

I am installing a new pool in Feb. would Like some tip Aqua Genie skimmer. 18x32 should i have 2?

Hi...I am new to this site. I just had my pool resurfaced with Pebble Tech. I did not replace the water line tiles as they are in very good...