Cloudy water & filter on-off time

[Phillbo]

What type of filter do you have ? I doubt the cloudiness is caused by the run time. Mine only runs 7 hours a day and I have no cloudiness problems.

[RobDHW]

It's a 24'x13' concrete IG pool w/ avg. depth of 4'.
Cl = 10+
Ph = 7.5
TA = 100
CA = 200
CYA = ? because I'm currently out of reagent, but I'd bet it's *way* high - close to 100 - due to a goof early in the season caused by guess strips (which have been replaced by a test kit).

Tagelus TA50-D sand filter w/ 3 or 4 year old sand. The filter has a slow leak to waste, which I'll deal w/ after the season, since replacing the spider gasket & diverter didn't fix it.

[aylad]

There are tons of reasons why your water could be cloudy, but in this case I don't think it's the run time--my filter runs anywhere from 7-12 hours daily--and usually less than 12--and I don't have a cloudiness problem. Have you shocked the pool? With a high CYA it's really easy to let your chlorine get too low and have a nascent algae bloom occur........

Janet

[RobDHW]

That was my 1st thought. I've been adding 1 to 1.5 gal bleach every day & the Cl level is usually btwn 2 & 5 before I add it.- I don't *think* that's it. The reason I was leaning that way is that I've had the pump on 24x7 the last 2 days & now the H2O is clear. Who knows. Just was wondering. The water looks great now & tests fine. I know w/ way high CYA to keep the CL 10+ I'll just keep playing around w/ Cl & filter time & see what works.

Thanks

[aylad]

If your CYA is actually 100, then anytime you let the chlorine drop below 8 ppm you're opening the door for the algae. I would shock the pool. I really think you're just wasting money to run the pump/filter more than 12 hours daily unless it's a really undersized pump.


Janet

[RobDHW]

Cool. Thanks. I'll try & keep the CL higher - right now the pool is nice & sparkling...

(I've got the pump off)