Tried the calc program but it just dies on me when I hit calc. It says Run-time error 13 type mismatch.
Tried the calc program but it just dies on me when I hit calc. It says Run-time error 13 type mismatch.
Try downloading it again. I downloaded it about a week ago and it's working fine for me.
Sherra
Kershaw County South Carolina
18x34 IG 2' radius rectangle vinyl liner (approx 27,500 gal) 1 1/2" pipes installed March 2006
(previous AG pool owner)
i tried to use that bleach calculator but i dont know what to put in for pool size (L)
Fog and Kay,
put in gallons for pool size......It works, you may be asking it to calculate without giving it enough info.
Dave S.
Go into "more calcs" at the top of the window and go down to "settings" and change it from metric to imperical and your default units will be in gallons then...no conversion necessary! You can also enter your pool size in the settings and you won't ever have to enter it again.Originally Posted by fog80
Sherra
Kershaw County South Carolina
18x34 IG 2' radius rectangle vinyl liner (approx 27,500 gal) 1 1/2" pipes installed March 2006
(previous AG pool owner)
Repeat 10 times "I am an idiot!"
I finally read the instructions again and found my mistake. I was entering 5.25% as 5.25% rather than "5.25"! Once I did it right it works well --- GREAT PROGRAM.
Downloaded it three times, still won't work.
I had to add a gallon every other day to keep my levels where they needed to be. I just switched from baquacil last summer and used bleach about the last month and a half, but I had it pretty much down to a routine. Of course, I have forgotten everything and will have to play around some this year, but you will notice a pattern and can pretty much stick by it.
Posting Permissions
Bookmarks