+ Reply to Thread
Results 1 to 3 of 3

Thread: Aqua Logic Controller not responding

  1. #1
    Join Date
    Jun 2006
    Location
    Southern California
    Posts
    5

    Default Aqua Logic Controller not responding

    I have a GoldLine (AQL-PS-8), that all of a sudden is not responding to any key press either on the inside the house wired controller or at the main controller. The keys beep when pressed, however nothing happens. I cut the power to force a reboot, however that did not fix the issue. I looked through the manuals and I didn't see any type of keyboard lock that may have gotten activated. We did have a little bit of rain today in (So Cal) but the controller was closed and dry. Any thoughts?

    Thank You
    Steve

    How I noticed the problem was the pool light was on, which was strange since nobody had turned it on that I was aware of. I went to turn it off and couldn't. After the reboot the light did go out.
    Last edited by desalvsj; 10-15-2009 at 02:14 PM.

  2. #2
    waste is offline PF Support Team Whizbang Spinner waste 3 stars waste 3 stars waste 3 stars
    Join Date
    Dec 1969
    Location
    S.E Maine
    Posts
    1,753

    Unhappy Re: Aqua Logic Controller not responding

    The only thing that comes to mind is that there was some lightning involved with the rain and the motherboard might have gotten fried
    Luv & Luk, Ted

    Having done construction and service for 4 pool companies in 4 states starting in 1988, what I know about pools could fill a couple of books - what I don't know could fill libraries

  3. #3
    Join Date
    Dec 2005
    Location
    Winter Park, fl, usa.
    Posts
    6

    Default Re: Aqua Logic Controller not responding

    What was the outcome? I have a similar problem

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts