I would go with the 1 HP 2 speed SP2607X102S. If the old 1 HP was good enough, then this one should be as well.
Re: Question about pumps
I would go with the 1 HP 2 speed SP2607X102S. If the old 1 HP was good enough, then this one should be as well.
Last edited by mas985; 05-05-2011 at 10:20 PM.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Re: Question about pumps
Yeah, the 1 hp should be more than good enough. I've got that one for 9 years now.
Carl
Re: Question about pumps
"The piping is 2 1/2" both intake and out."
I assume, OD (outside diameter), which would mean that it's nominally 2" PVC. That's a good size, but the nomenclature will be important when you go to get all the bits and pieces.
If you REALLY mean 2.5" pipe . . . you are into some really oddball stuff, and should make sure of your replacement fittings BEFORE you cut anything loose.
Ben
PoolDoc / Ben
Posting Permissions
Reply With Quote
Bookmarks