Re: Putting up pool, need all the advice I can get!
Regarding chlorine, you need to use the Best Guess Chart, linked in my signature below. (Or if you prefer more decimals in your answers, you can use Richard's (Chem_Geek) more elaborate version on TFP.)
What make / model of SWCG do you have? That sounds awfully low. By chance, is it one that is supposed to be combined with some sort of copper ('mineral') product?
TA does not have to be that high, but again I'm curious about your unit.
Ben
PoolDoc / Ben
Re: Putting up pool, need all the advice I can get!
THis is the brand of swg I have:" Krystal Clear Saltwater System Model CS8110". I tend to agree with you that the levels are too low. The swg did come with copper test strips. I will use the Best Guest chart as you suggested. To increase the chlorine level should I add bleach or just run the swg longer?
THanks!
Vickeybear
I have an Intex metal frame rectangle pool, 9700 gallons. 12x24x52".
Krystal Clear Saltwater System Model CS8110
Krystal Clear Sand filter pump 14" model SF15110
Re: Putting up pool, need all the advice I can get!
Just use some bleach and save the life of your cell.
Posting Permissions
Reply With Quote
Bookmarks