Quote Originally Posted by Xihog View Post
Within the last 3 weeks I have replaced my salt cell (SC-48), the tri-sensor assembly, and the salt cell cord that runs from cell back to control box. This is the 4th year with the system, and I have had some type of issue each year. Before replacing tri-sensor, the unit had warning purifier off low flow. Now it shows low salt level add 750 lbs of salt. I have tested three times with strips and the average is 3500 ppm of salt. I have tried to recalibrate salt in system settings but I can only get it to go to 1200 ppm. Autopilot customer service dept has been very unwilling to offer assistance, so I have given up on calling them. After spending $750 trying to get this swg going I am in need of help. If anyone has had this issue or knows how to resolve this issue I would be very interested in hearing from you.
Hi Xihog,

Has this issue been resolved?

When you state that you've had this issue every year, can you expound on your experience? Are you replacing your cell every year? I'm making a decision soon on upgrading so I'm trying to absorb all of the information I can!

Thanks!

Tony