OPENING POOL FOR FIRST TIME...need help

[Watermom]

Another way you can add the stabilizer is to pour it slowly into the skimmer and let it dissolve in the filter. Then, make sure you run your pump 24/7 for at least 4 or 5 days. That is the way I always add mine. It will take up to a week to dissolve, so don't test for it or add more until at least then.

Welcome to the forum! Hope you find it helpful and enjoy being a part of it!

[aylad]

And to add to their spot-on advice, make sure you're adding chlorine 2-3 times daily so that your chlorine level never drops below 3 ppm while you're waiting for the stabilizer to register in the water. With no stabilizer, it only takes a couple of hours for the sun to consume all your chlorine, so you'll need to be diligent about keeping chlorine in it until you have some CYA.,

Janet