AG Pool Drop In Steps

[medvampire]

I did som minor mods to get it to attach to the deck.
See attached pic.
T --- Cut upright pipes from ladder kit to correct height.
Z --- Cut base pipe slots off to corret deck height and added screws. Used ground platform for attachment to deck by addin screws.
E --- Added 2x6 to bottom of platform to set to deck height.
F --- Cut "water noodle" to fill slot to prevent broken toes.
I dont think this step would be stable enough with out some kind of out side attachment. If your smimmers are light weight you might get by with the straps that go around the rail and top platform to hold it in place. Included were screws you could put in the top rail of the pool but I was kinda nervious about drilling holes in a new pool. The set up is very stable even with me on it. I am am big boy so I need one that would handle my weight. As for water flow it seems pretty good. I did notice a little crud under it that I will blast with a hose next time I add water.