+ Reply to Thread
Results 1 to 10 of 11

Thread: Help - problems with Bioguard MS11

Hybrid View

  1. #1
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Posts
    3,729

    Default Re: Help - problems with Bioguard MS11

    Quote Originally Posted by kevinm
    Very helpful, thank you again. I looked for calcium chloride tonight but couldn't find any (tried 3 stores). I may have to go to the pool store for some.

    Thanks again,
    Kevin
    Buy a bag during winter when they put the de-icers out! When you go to walmart, kmart, home depot, etc. Look in the pool dept for calcium increaser...usually cheaper than the pool store. Same stuff as Dowflake. I wouldnt be surprised if the pool chemical brands were just repackaged Dowflake since they are one of the larger manufacturer's of calcium chloride!
    Last edited by waterbear; 05-11-2006 at 08:28 PM.
    Retired pool store and commercial pool maintenance guy.

  2. #2
    Join Date
    May 2006
    Location
    Potomac, MD
    Posts
    22

    Default Re: Help - problems with Bioguard MS11

    I received my replacement cell today. Installed it - had to unplug the power from the controller to get it to reset, and now it appears to be working.

    I ordered a 234s test kit last Sunday, hopefully I'll receive it soon and I'll retest all of the numbers.

    Meanwhile, I've been testing ph and cl daily and adding bleach and acid as needed.

    The water is still very clear. The sides and bottom still appear "dirty" any idea what this could be or how to clean it - I've tried brushing several times, no change.

    Thanks again for all of the advice,
    Kevin

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts