High PH - Feeling stupid

[Simmons99]

It sure does - thanks!

[Newbie65]

Okay, folks here's the newest readings:
TC = 5 after dosing and holding at 15 ppm for 2 or 3 days
PH = 7.2 holding steady after first dose of muriatic acid at beginning of thread
Alk - 180 not really a problem (I don't think) always runs high
CYA - 30 - 50 last time I checked w/strip test

Can't afford Ben's kit right now, daughter just enrolled in college!

I have a 27,260 gallon AG pool, 1.5 hp pump, 300lb Hayward 244T sand filter, w/2 skimmers and 2 returns.

This morning is the first time since May 18 that I have been able to see the bottom. Let me say thanks again to all who helped! My problem now is, I can see light tan stuff on the bottom. The water is not completely clear but clear enough to see the stuff. I got home and vaccumed to waste until my water level caused me to stop. I wasn't able to make a very big dent in the tan stuff, seems like it just moved around.

Since the tan stuff on the bottom is probably algae should I go ahead and raise my chlorine level to 15 or 20 again or just keep vaccuming when I get more water back in the pool?

Do I brush and stir everything up again? I'm really not sure what route to take and I've got bleach bottles coming out the wazoo! Recycle day can't get here soon enough!

Hope someone replys soon, it'll be dark soon.