+ Reply to Thread
Results 1 to 3 of 3

Thread: upgrade options for pump/filter....

  1. #1
    Join Date
    Jun 2011
    Location
    Oklahoma
    Posts
    46

    Default upgrade options for pump/filter....

    I am looking for suggestions in uprading my pump/filter. I have the original pump/filter that came with the pool. My pool info as well as pump/filter info should be in my signature.
    20' x 48" Intex round Ultra AGP ~8800 gallons -- Intex krystal clear 635t 1500gph; PF: 13

  2. #2
    Join Date
    Dec 2004
    Location
    Howell NJ
    Posts
    112

    Default Re: upgrade options for pump/filter....

    Hi. Not sure what pump and filter you have by your signature. I think if you post what you actually have the folks here can help you better.

    If you look around the site here, you will see the consensus is a large sand filter coupled with a two speed pump. Cleans well and saves electric.

    Hope this helps.

    Mike NJ
    12x18 vinyl AG 6.2K gal; Hayward equp: 16" sand filter (spring clean up) -- Xtream 100 sft cart (after clean up) -- Power Flo Matrix 1hp 2spd pump w/ AO Smith motor

  3. #3
    Join Date
    Jun 2011
    Location
    Oklahoma
    Posts
    46

    Default Re: upgrade options for pump/filter....

    The pump/filter I have is the original that came with the pool. Intex krystal clear 635t 1500gph(which i assume stands for gallons per hour). I dont really know anything else about it. There was no horsepower ratings listed.
    20' x 48" Intex round Ultra AGP ~8800 gallons -- Intex krystal clear 635t 1500gph; PF: 13

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts