+ Reply to Thread
Results 1 to 10 of 16

Thread: Opening with very high ph and mustard algae

Hybrid View

  1. #1
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,207

    Default Re: Opening with very high ph and mustard algae

    Then, till the algae is gone, try to dose to 15 ppm (15 gallons of 6% bleach) and repeat before levels go below 5 ppm.

  2. #2
    Join Date
    Feb 2012
    Location
    NJ
    Posts
    19

    Default Re: Opening with very high ph and mustard algae

    First of all thanks for all your advice

    Was away for 5 days and had to do what I could before I left.

    FC and CC need major dose when sun goes down

    ph 7.4
    TA 50ppm
    CH 130ppm

    CYA - The black dot does not disappear even after I filled the tube to the top.

    Thanks!
    52K gal IG pool - Jandy 2.5 HP Uprite MHPU Series Pump - Hayward S270T2 High Rate Sand Filter - attached spa - PF:2.3

    24'x50' free-form 52K gal IG pool; Liquid Chlorine or Bleach; Hayward sand filter; Jandy 2 1/2 HP pump; 8/10/2012hrs; Taylor 2006 ; well; summer: ; winter: ; iPad; PF:2.3

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts