Which one should I adjust first

[aylad]

How do you keep the PH down? Do you keep adding acid? It seems so corrosive. I've added a gallon over the course of a week but my PH is still too high. How much can you add at once? It's 30,000 gallons and the acid is 31% concentrate. Also, my chlorine level is high and the pool smells bleachy and from what I've read that means I should be adding more liquid chlorine or shocking...do you think that's right?

What is your TA level? To keep the pH down, you'll need to add acid, but if your TA is too low, you may be having to add more acid than necessary. Just add whatever amount you need to add to get your pH where you want it. Also, I don't know what kind of pool you have, but rising pH is something that is part of life if you have a gunite pool.

And yes, if your pool smells bleachy, you're smelling chloramines, which need more bleach to burn off. What is your Cl and CYA level?

Janet

[Sunny32504]

Okay I just heard from the pool store that 90 ALK is good for my pool and I thought it was suppose to be 120. Toooo late I added 4 1 lb boxes of baking soda Anyways I was also told by the pool store to add only 1 pint of acid in my 24' round pool which is I think about 17,000 gallons . Does that sound like enough . Thank you so much for the replies . Also if I shock my pool will it kill the bugs I have living in there also ?

[MarkC]

Add half that then retest the pH in a few hours if you need more repeat.

[prh129]

A 24' round AG pool should only be around 13500 gallons, not 17000.

If you test a couple hours after you add the acid, you will find out if it is enough. Testing is the key - you need to know where you are and where you want to go before you start adding chemicals. It's better to add less and move closer to your target than to add too much and overshoot (for everything - pH Cl Alk CYA etc.)

Peter