+ Reply to Thread
Results 1 to 10 of 16

Thread: First time adding chemicals to 18x48 intex ultra frame pool..HELP!

Hybrid View

  1. #1
    babyblueiz77 is offline ** No working email address ** babyblueiz77 0
    Join Date
    Jun 2012
    Location
    antioch, tn
    Posts
    5

    Default Re: First time adding chemicals to 18x48 intex ultra frame pool..HELP!

    Ok. On my Taylor K2006 test kit, my results were as follows:
    FC .5ppm
    Br 1ppm
    TC .5ppm
    ph 7.2
    TA-5 drops til red was 5, so that is 50 ppm's if i multiply 5x10.
    My Dad gave me this kit and I do not have a little clear bottle to complete the CYA test. Does the sample usually change colors? The video from Taylor looked cloudy but clear. If anyone has suggestions on another way to perform this test please let me know tips. If not, I will purchase a bottle this weekend. I am missing the instruction manual to my kit along with that little bottle. My kit does not have the cylindar that you fill up with sample water attached. It is seperate. When getting my samples, I filled the pool water up to the 25ml mark on all tests. The cl and br looked light pink in the cylindar, but when i poured it into the actual chart to compare next to the colors, it looked clear. Again, in the cylindar, it was at the .5 color level when placed next to the chart.
    I did not use the test strips this time since they apparently give false readings. Based on this, I am thinking my Br , TC and FC levels are low. When I subracted the TC .5 from the FC .5 it equals 0. Please let me know what needs to be done next. Thanks for your help.

  2. #2
    PoolDoc's Avatar
    PoolDoc is offline Administrator Quark Inspector PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars PoolDoc 5 stars
    Join Date
    Jan 2005
    Location
    Georgia
    Posts
    11,384

    Default Re: First time adding chemicals to 18x48 intex ultra frame pool..HELP!

    You have no bromine readings, unless you've added bromine. If you have a new K2006, you should have everything shown in the video. And, you wouldn't be getting a TC result; you'd be getting a CC result, and have to determine TC by addition.

    I assume you are matching colors, to determine chlorine? That's K2005, not a K2006. But, even a K2005 should have EVERYTHING shown in the CYA video here: www.youtube.com/watch?v=8whkC5WtS8g

    I'm not quite sure what's going on with you, or your pool. I think we both need to step back, and reconsider.

    I'd suggest that you add 1/2 gallon of 6% bleach to your pool and cover it. That will keep it for a few days.

    Then, let's figure out what sort of test kit you have, what you are measuring, whether you want to follow BBB approach to pool chemistry . . . and then whether you have the stuff on hand needed. I think we are both just spinning our wheels at present.

+ Reply to Thread

Similar Threads

  1. Intex 14x48 Ultra Frame Pool
    By Blmcmillian89 in forum Pool Chemistry for Intex-type Pools
    Replies: 5
    Last Post: 06-04-2013, 01:43 AM
  2. looking for Help with intex ultra frame pool 12 x 36 (frist time pool owner)
    By jon56048 in forum Pool Chemistry for Intex-type Pools
    Replies: 1
    Last Post: 06-14-2012, 12:00 AM
  3. Intex Ultra Frame Pool Hard Plumbing
    By labmom56 in forum Intex-type Pool Setup & Operations
    Replies: 4
    Last Post: 05-08-2012, 01:34 AM
  4. Who has an Intex Ultra Frame 24' pool?
    By jkoch in forum Above-Ground Pool Construction & Repair
    Replies: 16
    Last Post: 06-27-2010, 11:54 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts