Newbie needs help. Need a Plan Of Attack To Get This Pool Open

[bbb]

I run my EC-65 at between 20-30 PSI for WEEKS at a time - it's not really a big deal if you are still getting good water flow into the pool. It's not hurting anything IMHO. The acid wash should help - but believe it or not, I have never done an acid wash -- just a thorough (10 minute) rinsing out using that Hayward DE Filter cleaning wand. does the trick for me. I think that's the least of your worries at the moment, but it can't hurt **as long as you are REALLY careful with the acid!*** Now that you don't have live algae (which was turning your DE green, by the way), you should be able to go much longer between backwashings. And during backwashings, I remove the pressure gauge, and stick the wand in there to clean the fingers without even taking off the 15-screw filter cover.

You're making good progress.

I would remove the 3" tabs -- in your other thread it says your CYA is 70. That's on the very high side already and you don't want to add to it at all (3" tabs will increase your CYA). After you use up all your powdered shock you may consider moving to liquid shock (as the pool store calls it) or plain bleach (as everyone else calls it) - that won't increase your CYA. Have you purchased a drop-based kit yet? Is your water clear of debris now? What do you use to clean your pool?

About the 'missing fingers' -- I don't believe I have them either. Good luck!

pps -- "Alk increaser" is really baking soda, just so you know. As you read more, you may find yourself buying more grocery store type chemicals to get the pool up and running in the future at much less cost...