HELP PLEASE...I am going insane lol

[gonza2788]

Please help I have the same problem---kinda
I prepared my 18x33x52
AG pool according to the instructions from the manufacturer. I had an overlap of about 5 inches (not the 6-8 the manual said). When the first water tank of water came with 6, ooo gallons I took off the coving in some sections that seemed to have wrinkles. The liner instructions said to do this. About 3/4 of the 6, 000 gallons was in when the round sides of my liner started pulling in and popping the coving off and the walls began to buckle on those sides. Now there is barely 3 inches overlap on one side and about 8 inches on the other and the liner is completely off on the rounded sides. I had not put in the uprights and top rail yet. Should have I done this? Is it possible that the liner is too short? What can I do?

[hoffmans]

I saw a picture Dennis posted for someone who was having liner problems. The picuter shows a pool with the line streched over it for filling.
If I can find this old post I will link you guys to it.
Gonza and Taxt maybe you should start your own threads asking for help.
Good luck all!

[hrsdennis]

Hi, that post is in this thread

http://www.poolforum.com/pf2/showthr...5743#post15743

There is more info about that on the first page of this thread.

More detailed questions really should start a new thread.

Best of luck, Dennis