how to use BBB method on hot tubs

[pathas]

To the gentlemen who asked the question about this method - for some reason I couldn't reply to that thread

after you fill up your hot tub

1. get the ph and TA correct as follows:

DO this (use a test strip)

if TA and PH are both high, --- pour in some Muriatic Acid
if TA is high and PH is low, --- put in some BORAX (then Muriatic Acid to adjust both down)
if TA and PH are both low, --- put Soda Ash in
if TA is low and PH is high, --- put in BAKING SODA (then Muriatic Acid to adjust both down)

2. then add BLEACH - Clorox (use a test strip)

3 After every use add some Clorox

4 - just keep your eye on the water whenever you get a chance. check the ph, TA, and chlorine levels once or twice a week.

that is all you have to do. don't make it more complicated than it needs to be.