+ Reply to Thread
Results 1 to 4 of 4

Thread: Aqua Rite motherboard replacement wiring

  1. #1
    Join Date
    Jun 2006
    Posts
    5

    Default Aqua Rite motherboard replacement wiring

    OK, so my motherboard was fried (2 very black spots burned thru). It is an old system, and the motherboard changed in 10/04 I think. The fuse is different now. So I pull the orange and yellow wires and put in the new fuse. Thing is, I accidentally also pull the orange and yellow wires off the regulators. Unfortunately, there are 2 open connectors on each regulator--- one is unused. And I do not remember which one it was.

    Can someone tell me where the other end of the yellow and orange wires connect (upper right corner, or....etc)?

    Thanks,
    Noel

  2. #2
    Join Date
    Jun 2006
    Posts
    5

    Default Re: Aqua Rite motherboard replacement wiring

    Anyone?

    Anybody willing to just pull the 2 screws that hold the faceplate and take at look for me?

    Thanks

  3. #3
    mas985's Avatar
    mas985 is offline PF Supporter Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,420

    Default Re: Aqua Rite motherboard replacement wiring

    It should be one of the these pictures, no?

    https://www.google.com/search?num=50...M4K1iwLq5IGYCQ
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

  4. #4
    Join Date
    Dec 1969
    Location
    Virginia
    Posts
    747

    Default Re: Aqua Rite motherboard replacement wiring

    Sorry for the late reply. Don't know if you found your answer yet (did you try calling the manufacturer?), but if not, I'd be happy to take a peek at my Aqua Rite and let you know what I see.
    22'x40' Grecian Lazy L 20K gal IG vinyl pool; Aqua Rite SWCG T15 cell; Hayward Pro Grid 6020 DE filter; Hayward Superpump 1hp pump; 12 hrs; Taylor K-2006; city; PF:6

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts