Filtration problems / pump size

[thedubb]

Thanks. I just didn't think it should get stopped up that quickly. If I can't retrofit the pump I'll probably buy a new one. Most sites don't list any GPM rating for their pumps, very frustrating. I'm with you and think a 3/4 hp will be more than sufficient. The 1.5 I have is probably why the filter assembly and valve had to be replaced. Are there any health concerns with using bleach in place of shock?

[thedubb]

Sorry, one more thing. After adding the bleach or shock should I leave the pump running or shut it down for the night? I've been running it 24/7 to try and get this cleared up.

[PoolDoc]

It's common for AG kit manufacturers to oversize pumps, because pool purchasers naively assume that more HP = better performance. And, it's cheaped to increase pump HP than it is to increase filter size.

[mas985]

Do you have a model # for your pump? Not all 1.5 HP AG pumps are that "large" and most are smaller than 3/4 HP IG pumps.

[CarlD]

Sorry, one more thing. After adding the bleach or shock should I leave the pump running or shut it down for the night? I've been running it 24/7 to try and get this cleared up.

Keep the pump and filter running 24/7 till it's back to normal.