+ Reply to Thread
Results 1 to 2 of 2

Thread: new pool run time

  1. #1
    Join Date
    May 2006
    Posts
    7

    Default new pool run time

    i have a new pool 60 days old and from what I can see I can turn my water over twice in 6 hours is there any reason that i should run my pool pump longer?
    should i run it all 6 hours during the day or two 3hr time slots..... or 8hrs or more.....

    the pool gets full sun from 10am-8pm

    my pool.... 10,500 gals, pool/spa, whisperflo 2-hp pump, 150sq clean&clear filter, autopilot digtal, aqualink, hayward heat pump....

  2. #2
    mas985's Avatar
    mas985 is offline PF Supporter Whizbang Spinner mas985 3 stars mas985 3 stars mas985 3 stars
    Join Date
    Dec 2004
    Location
    Pleasanton, CA
    Posts
    1,420

    Default Re: new pool run time

    If you can, two time slots is usually better than one. I like to run my pump as short as possible so I usually run it 1 to 1.5 turnovers per day all duriing the heat of the day for solar. I have never run the pump for more than 2 turnovers and don't have any problems keeping it clean.
    Mark
    Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
    18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts