+ Reply to Thread
Results 1 to 7 of 7

Thread: Hello new friends and first test numbers.

Hybrid View

  1. #1
    BigDave's Avatar
    BigDave is offline Lifetime Member Whizbang Spinner BigDave 3 stars BigDave 3 stars BigDave 3 stars
    Join Date
    Jul 2010
    Location
    New Jersey
    Posts
    1,916

    Default Re: Hello new friends and first test numbers.

    I pour my bulk (5 gallon) bleach into one gallon containers for ease of handling. I measure my doses with a "red solo cup". You might want to consider diluting the high test. Concentrated sodium hypochlorite breaks down much faster from heat and light than dilute.
    12'x24' oval 7.7K gal AG vinyl pool; ; Hayward S270T sand filter; Hayward EcoStar SP3400VSP pump; hrs; K-2006; PF:16

  2. #2
    Join Date
    Jun 2013
    Location
    Texas
    Posts
    4

    Default Re: Hello new friends and first test numbers.

    Thanks Dave. I got a 2 gallon bucket from Home Depot with all kinds of different measurements marked on the inside. It worked like a charm. You are correct about the higher strength sodium hypo. The batch I used today tested out at 15.5% in the lab. We had some today that was 22%. Anyway, I added it at dusk and poured it slowly into one of the waterfalls in the deep end. The pump is going to run for three hours. I'll test the chlorine tomorrow and add as needed.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts