Could use a little help!

[Watermom]

Did you run your pump for awhile before you tested to make sure the rain water was mixed in and you were not just testing the top layer --- rain water? I'd go ahead and keep the chlorine high again today since you showed a drop of 5ppm and also, keep running the pump.

[PoolDoc]

Persistent cloudy water can indicate filter failure. If you have a sand filter, do the DE test -- http://pool9.net/de-test/.

If you have a DE filter, open it, clean it out, check it, and restart it.

If you have a cartridge filter . . . you probably need new cartridges, made by Filbur or Unicel (they also make most of the OEM cartridges). Tell us the make/model of your filter so we can find one for you. (DO NOT GET AN ASIAN MADE cartridge, like what's sold by most pool stores!!)

. . . membership updated.