Re: pump won't prime with extra hose attached
I'm assuming you already know to submerge the hose and fill it with a jet before attaching it through the skimmer... So, every time I have trouble maintaining prime with a hose attached, there has been an obstruction in the hose or vacuum head (usually a large acorn). That's where I would start...
-Eric B. 16x32 rect 14,364 gal AG (Intex Ultra Frame); 14 in sand filter; 1 HP 2800 GPH pump; 8 hrs; Taylor K-2006c, utility water, debris cover
@Best Guess chart http://pool9.net/cl-cya @K2006 http://pool9.net/testkits
Re: pump won't prime with extra hose attached
Yes hose is submerged, made sure it had no trapped air or blockage. Just an 8' length of hose will be too much for the pump.
Re: pump won't prime with extra hose attached
Could it be that the end of the hose is down lower than the skimmer pipe opening, so in effect the pump is trying to draw water up a greater height?
Posting Permissions
Reply With Quote