Need Help with my new Summer Escapes ProSeries 14' X 42" Metal Frame Swimming Pool

[Pappy]

Do what Pool Doc said. If everything is wonderful then - IF - you want to go the Intex SWCG route, it can be done. But you'll also probably have to use an Intex pump.

http://www.intexcorp.com/index.php/h...m/28677eg.html
is the one I'd recommend. You can probably find it on Amazon.com about as cheap as anywhere, and if you buy it through Pool Doc's or WaterMom's blue signature box, it helps PoolForum. I'd also recommend disconnecting the "copper ionizer", IF!!! and only if you feel very comfortable in doing so. Copper is what turns blond hair green and can cause stains on your liner.

Look over the manual
http://slink.intexdevelopment.com/b2...R0_1407_EN.pdf

Keep in mind that you will probably need to enlarge the holes in your liner and will need to buy 2 plunger valves; 2 each of items 31, 32 and 33, one 34, and one 42; listed on page 4 of the manual. Intex is the best place to buy these parts that I found.


Look at
http://www.poolforum.com/pf2/showthr...ter-changeover.
before you decide to buy anything

Here's the link to Amazon. http://poolforum.com/amz/
Enjoy your new pool!