Sounds good.

I noticed on your pool report that the bleach was 12%. Fresh 12% bleach will add a full pound of chlorine (Cl2 gas equivalent) to your pool -- 10 gallons would be 40 ppm of chlorine. When I was cleaning up big commercial swamps, I'd usually dump the equivalent of 100 ppm into a pool all at once. I don't recall that doing so ever failed to 'turn' the pool within hours. You've added at least 160 ppm, though over several days.

I'm wondering if you have a bunch of ammonia in your pool. CYA is biodegraded by swamp slime (algae + bacteria). It can end up as harmless nitrogen, but it sometimes ends up as ammonia, and requires HUGE amounts of chlorine to clear. Do you remember what your CYA level was last fall?