Results 1 to 10 of 12

Thread: K-2006 Arrived! Results Within

Threaded View

  1. #2
    Pappy is offline PF Supporter Widget Weaver Pappy 0
    Join Date
    May 2014
    Location
    Plano, TX
    Posts
    261

    Default Re: K-2006 Arrived! Results Within

    Bleach first! Get up to about 3ppm at sundown (or when the sun is not shining on the pool). pH is next, add a box of 20 Mule Team Borax ASAP. Less than 7 might mean 3. Low pH can damage your pool. Dose with borax, wait 2 hrs, test, redose, repeat, till pH is ABOVE 7.

    Also, it looks like you are using 25ml samples rather than10ml. Each drop in a 25 ml sample is .2ppm. Each drop in a 10 mil sample = .5ppm. 10ml samples are plenty accurate for the purpose of maintaining your pool.

    Enjoy your pool!
    Last edited by Pappy; 06-04-2014 at 12:34 AM. Reason: clarification
    Intex 15ftx4ft 4500 gal. 3/4 HP Pentair WhisperFlo pump. Hayward 21" sand filter. Taylor K-2006 & K-1106 kits. PF=27

Similar Threads

  1. Help with K-2006 results
    By Ohio Canoe in forum Testing and Adjusting Pool Water Chemistry
    Replies: 5
    Last Post: 07-20-2012, 02:58 PM
  2. First K-2006 results...prognosis?
    By mgzych in forum Testing and Adjusting Pool Water Chemistry
    Replies: 4
    Last Post: 06-19-2012, 02:23 PM
  3. First time using K-2006, need to interpret results
    By Wraypau in forum Testing and Adjusting Pool Water Chemistry
    Replies: 8
    Last Post: 05-22-2012, 09:58 PM
  4. need help reading cya results from K-2006 test kit
    By Kateyru in forum Testing and Adjusting Pool Water Chemistry
    Replies: 2
    Last Post: 05-05-2012, 03:17 PM
  5. 2006 1st time PS232 test results, etc...
    By faithfulfrank in forum DPD-FAS based testing
    Replies: 3
    Last Post: 05-08-2006, 09:20 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts