Hello, I am having a 24' pool installed Wednesday and I'm supposed to have electric ran to a pad for my installer and I'm clueless on what is required. I planed on having GFCI breakers for the two (one for filter and one for heater) at the electrical panel and then running underground no more than 50' max because they have to have their own dedicated breakers. My problem(s) are:

1) In the instructions there are two different motor types for 1-1/2 hp motors would is specify this on the motor so I can determine what amp breaker 15 or 20?

2) The heat pump I'm confused, does it have to have GFCI if not great. Also, should I run a 25 amp or 30 amp breaker @ 10/3 UF-B?


Pentair Sand Dollar 22" Sand Filter with 1-1/2 hp Dynamo Pump:
http://www.royalswimmingpools.com/Me...llarmanual.pdf

Aqua Pro 500 Heat Pump:
http://edc.poolsupplyworld.com/wpdf/...uaprospecs.pdf


Thanks!