+ Reply to Thread
Results 1 to 10 of 10

Thread: Help! Too much bleach during conversion!

Hybrid View

  1. #1
    duraleigh Guest

    Default Re: Help! Too much bleach during conversion!

    Almost surely you have not hurt your liner. (Thought I'd be positive 'cause there's nothing anyone can do, anyway)

    Seriously, I'll bet you're fine.

    I think it would be very instructive to many of us if you could post your Cl reading tomorrow AM. Please let us know

  2. #2
    Join Date
    Jun 2006
    Posts
    44

    Default Re: Help! Too much bleach during conversion!

    Thanks for the encouragement--I feel like an idiot for first converting to Baquacil (the Pool Life magazine made it sound so great) and then accidently typing in the wrong # for the calculation. Right now I'm draining out some water so I replace it with new. Probably should have done that first.

    I will post my readings in the morning. Very scared right now!

  3. #3
    Join Date
    Jun 2006
    Posts
    44

    Default Re: Help! Too much bleach during conversion!

    Almost forgot--and no laughing, please--my pool is just a pop-up, 3000 gallon. I used the 6% bleach and put in 174 ounces, should have put in 102 ounces. It's not quite double, but who's counting at this point! The pool is a murky, greenish blue with shiny stuff floating on top. My husband is such a sweetie, he said if the pool is ruined we'll just get another one.

  4. #4
    waterbear's Avatar
    waterbear is offline Lifetime Member Sniggle Mechanic waterbear 4 stars waterbear 4 stars waterbear 4 stars waterbear 4 stars
    Join Date
    Nov 2004
    Location
    St. Augustine, Fl
    Posts
    3,729

    Default Re: Help! Too much bleach during conversion!

    be sure to get a bunch of the disposable filters for it. You will need them as the conversion goos them up!
    Retired pool store and commercial pool maintenance guy.

  5. #5
    Join Date
    Jun 2006
    Posts
    44

    Default Re: Help! Too much bleach during conversion!

    I can't believe that my level is 0. Where is the chlorine going???!!!

    Added a gallon of bleach this morning, and will monitor it today.

    Water is murky, pea green color.

    I know you all talked about goop on the filter, but mine was just a gold color with no goop. I was glad, since on Baquacil my filter would clog in a few hours. But, does this mean not enough reaction is happening?

  6. #6
    mbar's Avatar
    mbar is offline Lifetime Member Whizbang Spinner mbar 3 stars mbar 3 stars mbar 3 stars mbar 3 stars
    Join Date
    Dec 1969
    Location
    Ashland, PA
    Posts
    1,008

    Default Re: Help! Too much bleach during conversion!

    It's eating up the baquacil - keep dosing the pool with bleach - check it as often as you can, bring it back to shock levels and be consistant - the more consistant you are the faster your pool will clear. Good luck!
    Northeast PA
    16'x32' kidney 16K gal IG fiberglass pool; Bleach; Hayward 200lb sand filter; Hayward pump; 24hrs; Pf200; well; summer: none; winter: mesh; ; PF:7.5

  7. #7
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,571

    Default Re: Help! Too much bleach during conversion!

    See? You didn't hurt your pool! You need to KEEP dosing it with bleach...though with a 3000 gallon popup, why didn't you just drain and refill, and then dose it with bleach?
    Carl

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts