-
Re: I can't seem to keep a FC level above 1.0.
Ok. Test it this evening and go ahead and add enough bleach to get back up to shock level. Until you can hold a chlorine reading overnight without losing more than 1ppm of FC, continue to shock the pool daily. Once you pass the overnight test, we typically suggest keeping the chlorine high for one additional day for added insurance and then you can let your chlorine drift down. (By the way, it is best to shock the pool in the evening. Then, an hour or two later, test your chlorine so you'll have a reading to compare to the next morning.)
Keep us posted how things are going.
(No need to test alk every day unless your pH starts bouncing around. As long as pH is stable, testing alk once every week or two is fine.)
-
Re: I can't seem to keep a FC level above 1.0.
Thanks!
Once again, you guys are the best! I wish I had found you guys when we first bought our pool in '93. We wouldn't have gone with Baquacil and had that nightmare of an experience. You guys got us through the conversion and it's been great since. ..well a few hiccups but y'all always help me through it.
Thanks for the tips. I usually shock/add all chemicals at night but ran out of bleach and had to wait for store to open to buy more this time. I didn't know I don't have to test alkalinity every time. I've been testing ph and alkalinity every time, but not CYA.
I just tested.
fc 7.0
cc 0
I'm taking it back to shock level and will test again in 2 hours as suggested, then first thing in the morning.
Thanks!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules