Baquacil to Bleach conversion (help needed)

[CAPTCHEMCL]

My recommendation would be to not worry about the other chemicals till you reach the goals of 15ppm overnight with 0ppm combined chlorine. As far as sweeping to waste, I suppose you could do that but I think I would wait and let the clorox do its thing, kill off the baquasil (and anything else), let it start to settle out on the bottom then sweep to waste. Making sure you backwash your filter periodically so that it does not get overloaded with the junk it is filtering out. The rest of your readings may not change much (ours hardly changed at all from the beginning till we were done). The clorine level is the most important thing right now. Check it often during the day and keep it at 15ppm. It will burn off quickly till it eats up the baquasil. (Again, anyone reading this who knows more please correct me if I am mis-stating any information. I just completed our conversion with no problems and that is all I have to go by...that and the multitude of postings I read throughout the process!)

Again, trust me, in a few days you will not believe how beautiful the water will be!