+ Reply to Thread
Results 1 to 10 of 18

Thread: Pool only 1/2 full

Hybrid View

  1. #1
    duraleigh Guest

    Default Re: Pool only 1/2 full

    If you'll get in the pool to stir it up, I would put in a box of Borax to get your pH up. I would also put in a small jug of Clorox for sanitation.

    Get a bunch of folks in there with you to stir it all up. Sounds like a PARTY!!

  2. #2
    Join Date
    Dec 2004
    Location
    Fountain, Florida, USA.
    Posts
    57

    Default Re: Pool only 1/2 full

    Yes it is a new liner. Should I put a whole box of borax? My box is 76 oz. And one gallon of bleach?

  3. #3
    tundraSQ is offline Registered+ Thread Analyst tundraSQ 0
    Join Date
    May 2006
    Posts
    73

    Default Re: Pool only 1/2 full

    Quote Originally Posted by newtopools
    Yes it is a new liner. Should I put a whole box of borax? My box is 76 oz. And one gallon of bleach?
    that seems about right...maybe 2 gallons of bleach and 1/2" box borax to start and then retest before adding the rest of the borax...just obviuosly be carefull whith the bleach....have it dumped into the side opposite of where you are standing to begin with for obvious reasons

  4. #4
    CarlD's Avatar
    CarlD is offline SuperMod Emeritus Vortex Adjuster CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars CarlD 4 stars
    Join Date
    Dec 1969
    Location
    North Central NJ
    Posts
    6,571

    Default Re: Pool only 1/2 full

    Borax? If the slime is due to algae, yes (and it probably is). But alkalines typically feel slimy, so the pH may be high and borax would be WRONG! Test the pH first.

    Notice how if you get bleach on your fingers (ph=11) they feel slimy--before you quickly wash it off!
    Carl

  5. #5
    tundraSQ is offline Registered+ Thread Analyst tundraSQ 0
    Join Date
    May 2006
    Posts
    73

    Default Re: Pool only 1/2 full

    Quote Originally Posted by CarlD
    Borax? If the slime is due to algae, yes (and it probably is). But alkalines typically feel slimy, so the pH may be high and borax would be WRONG! Test the pH first.

    Notice how if you get bleach on your fingers (ph=11) they feel slimy--before you quickly wash it off!

    she said it was 6.8...might be good to retest though after the bleach was in.

  6. #6
    Join Date
    Dec 2004
    Location
    Fountain, Florida, USA.
    Posts
    57

    Talking Re: Pool only 1/2 full

    Day 2 pool is still about 1/2 way full. Looks great. I have put in 1 box of borax and 1 jug of bleach. Here are my Walmart test kit #'s.

    ph-7.6
    fc-3.0
    cc-3.0
    alk-60ppm
    no hardness present
    I haven't added any stabelizer

    I have only recently finished adding all the chemicals and I tested about 20 minutes after getting in there and splashing real good. My water looks perfect.

    Sharon

  7. #7
    duraleigh Guest

    Default Re: Pool only 1/2 full

    Hi, Sharon,

    Nice work! You're off to a good start.

    As soon as you get enough water to start circulating thru the filter, I'd get the stabilizer in. Up until then, you'll probably need that small jug of Clorox each evening.

    Test your pH as it fills....it'll probably drift back down a little.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts