+ Reply to Thread
Results 1 to 6 of 6

Thread: Issue installing new light

Hybrid View

  1. #1
    Join Date
    Jul 2014
    Location
    Tx
    Posts
    24

    Default Re: Issue installing new light

    Success!! Jumped in the pool, wrapped the wire around a piece of PVC pipe, put my feet on pool side and was able to pull the power wire intact. Tried to get a fish through from the breaker box, but it got stuck abt 65 feet into the conduit. Pulled the fish back out and connected the ground wire to the fish. Was able to pull the ground wire out into the pool along with the fish. Connected the new pool light to the fish along with the ground wire and pulled them both back thru the conduit without too much trouble. I did give the wires a good silicon grease treatment, which I'm sure helped.

    Currently enjoying the color LED light show. Life is good....

  2. #2
    Join Date
    Jul 2010
    Location
    Largo, Florida
    Posts
    504

    Default Re: Issue installing new light

    Well done!
    rectangle 11.5K gal IG concrete pool;; 125sf cartridge filter; 2hp 1 speed pump; K-2006, k-1766; PF:10

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts