That is backwards. The spring side goes on the impeller side and the white ceramic goes in the mounting plate. That is what is probably overloading the motor. But you probably have ruined the seal so I would replace it.
Re: Replacing a motor on a pump, and getting the correct size for your pool?
That is backwards. The spring side goes on the impeller side and the white ceramic goes in the mounting plate. That is what is probably overloading the motor. But you probably have ruined the seal so I would replace it.
Mark
Hydraulics 101; Pump Ed 101; Pump/Pool Spreadsheets; Pump Run Time Study; DIY Acid Dosing; DIY Cover Roller
18'x36' 20k plaster, MaxFlo SP2303VSP, Aqualogic PS8 SWCG, 420 sq-ft Cartridge, Solar, 6 jet spa, 1 HP jet pump, 400k BTU NG Heater
Posting Permissions
Reply With Quote
Bookmarks