Here's the motor mounting plate. The portion of the seal with the spring is installed here, and the ceramic (white) side faces this half of the seal.
Re: Replacing a motor on a pump, and getting the correct size for your pool?
Here's the motor mounting plate. The portion of the seal with the spring is installed here, and the ceramic (white) side faces this half of the seal.
26,000 gal IG vinyl liner pool (20'x40'), Waterway SMF-110 wet end w/ Century SQS-1072R motor, Pac-Fab Triton TR60 sand filter, K-2006A. Manually added chems: 12.5% NaClO liquid, granular CYA, baking soda, 31% muriatic acid.
Posting Permissions
Reply With Quote