+ Reply to Thread
Results 1 to 9 of 9

Thread: CYA added per 3" tablet of trichlor - the answer?

Hybrid View

  1. #1
    Join Date
    Dec 2004
    Location
    IL.
    Posts
    341

    Default Re: CYA added per 3" tablet of trichlor - the answer?

    What is the % of available chlorine stated on the bucket of tabs you have? Does it correlate with the CYA % so that together they equal 100%?

    Just curious, cause if it does it would seem you could subtract the chlorine % from 100 and get the CYA total for other manufacturers pucks and sticks. EDIT- nevermind, I just checked, was thinking something else when I posted this. The label on my sticks says "90% available chlorine" and 99% trichlor...

    I used to use 8 oz trichlor sticks from Blue Wave. I have 12 left. I had been contemplating adding them to my pool to get the CYA up. If I use the % you listed above, each stick would have 4.32 oz of CYA. Using the bleach calc, to raise CYA in my pool by 10 ppm (21,200 gal) I would need 27 oz or 6.25 sticks. Not very many, and I can easily see why I had so many CYA problems in the past and didn't even know it.

    I've decided against adding more CYA, as I have about 10-20 right now, and my FC is holding good and staying lower on CL keeps me in line with the capabilities of my OTO test kit

  2. #2
    Join Date
    Jun 2006
    Location
    Central Texas
    Posts
    215

    Default Re: CYA added per 3" tablet of trichlor - the answer?

    Yep, I'm running 10-20ppm CYA as well, for the same reasons. But I like my auto-chlorinator and wanted to be able to calculate about when I needed to drain and dilute, rather than use the clunky turbidity test which doesn't go lower than 20ppm anyway. At this rate, it ain't long!

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts