+ Reply to Thread
Results 1 to 10 of 12

Thread: No suction at skimmer (kinda long)

Hybrid View

  1. #1
    Join Date
    Jul 2013
    Location
    Ohio
    Posts
    7

    Default Re: No suction at skimmer (kinda long)

    No, the pressure doesnt drop after putting in clean filter. No, i havent tried turning off the main drain. Im heading out now to mess with it. I'll do that and see what happens. Thanks

  2. #2
    Join Date
    Jul 2013
    Location
    Northern Illinois
    Posts
    816

    Default Re: No suction at skimmer (kinda long)

    If your experimenting shows that there is a blockage in the skimmer, you could put a garden hose in the pump basket into the skimmer line and see what happens. If there is a blockage, it may push it back into the pool if you have enough water pressure.
    26K gal 20x40 rectangular IG vinyl pool; Apr 2014: New pump, liner, auto-cover, & water; Pentair Whisperflo 1HP pump; Pentair Trition sand filter; Cover/Star CS-500 auto cover; Taylor K-2006C; OTO

  3. #3
    Anonymous [GDPR] European in the UK Guest

    Default Re: No suction at skimmer (kinda long)

    Hi JenniferC, It sounds like the filter cartridge is clogged by the phosfree as you suspect. Can remove the cartridge and just run without it to test flow and the gauge pressure?

    I know some people run with high phosphates and it works for them providing the free chlorine level is maintained at the correct level for your stabiliser level, did the pool shop disclose all the figures for you? Personally I prefer to reduce the phosphates so the pool doesn't go green in the blink of an eye if the chlorine tank runs out but others in the US don't and run successfully.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts