+ Reply to Thread
Results 1 to 10 of 20

Thread: How Do You Lower CYA?

Hybrid View

  1. #1
    Join Date
    Jun 2006
    Location
    Middle Missouri
    Posts
    79

    Default Re: How Do You Lower CYA?

    Thanks, all. I was afraid this is the answer I'd get.

    It seems that with my installation, I can only get by with a 30% drain at any one time. Think I'll wait until its time to close the pool.

    -Jim
    Jim
    16' x 32' / 15,400 gal / IG vinyl
    All testing done with
    PS234 test kit

  2. #2
    Sherra is offline Lifetime Member Weir Watcher Sherra 0
    Join Date
    Dec 1969
    Location
    South Carolina, United States.
    Posts
    184

    Default Re: How Do You Lower CYA?

    One option is to get a really big plastic tarp (wide enough & long enough to cover your pool plus about 10 feet added to each measurement...just the cheap roll you can get at any home improvement place for a few bucks) and use that as a membrane between the two layers of water (the pool water beneath and the fresh water on top). You can theoretically do a 100% drain/refill that way without any damage to your liner. It's been discusses several times on the board. I don't know if anyone's actually DONE it on the group, but I remember seeing that someone had SEEN it done.
    Sherra
    Kershaw County South Carolina
    18x34 IG 2' radius rectangle vinyl liner (approx 27,500 gal) 1 1/2" pipes installed March 2006
    (previous AG pool owner)

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts