Just remember that anytime you add bleach your adding a salt derivitive.

We use an SWG and are very pleased with the soft water feel. If you let the salt level get higher than 3200-3300 PPM you will begin to taste the salt. Our system has been crystal clear since startup in mid March with no chemical maintenance other than adding acid about once per week to keep PH under control. We run the pump on low speed for 12 hours each night with the SWG set at 40%. We have a 26000 gallon pool with 35PPM stabilizer. The SWG consistently maintains FC at 2.5-3.0 PPM with zero CC.

Others may differ with me on this but I'd rather use an SWG manufactuing pure chlorine than add bleach. If bleach is only 3-12% chlorine then how much other unwanted filler chemicals are you adding to your pool.

We also use a Pool Skim and Pool Rover that keep the pool very clean.