-
Re: Confused about pH and T/A going the wrong way
Robin,
You also have some test accuracy problems. In a pool of 25k, 1 gal of bleach will raise your Cl from 12 to 14.4. Yours went to 24?? One of those two tests is incorrect....badly.
Accurate testing and dosing is essential to clearing your pool.
-
Re: Confused about pH and T/A going the wrong way
Dave,
Thanks for you input. My problem is I have to keep my Cl level up because I have a bad algae problem. I came over to this board to get help lowering my pH and T/A so that the Cl can kill the algae. I've had this pool since June 10 and it's been green since June 14. I've just had to change from my Mark IV Test Kit that was left with the house to a Walmart Kit, while I'm waiting on Ben's Kit to arrive. (I didn't have access to this site for the 1st week here and that's when things got out of hand)
My Numbers are:
7/14 Cl 1.0-2.0 pH 7.4 /A 180
7/15 Cl 12 pH 7.6 T/A 240
7/15 Cl 12 pH 7.6 T/A 280
7/17 Cl 12 pH 8.0 T/A 240
7/17 Cl 12 pH 8.0 T/A 230
7/18 Cl 24 pH 8.0 T/A 190
7/18 Cl 24 pH 8.0 T/A 180
7/18 Cl 24 pH 8.0 T/A 210
7/18 Cl 24 pH 8.0 T/A 210
7/18 Cl 24 pH 8.0 Turned off aerater at this point
7/18 Cl 24 pH 8.0 T/A 190
7/18 Cl 24 pH 8.0 T/A 190
7/19 Cl 24 pH 7.6 T/A 190
7/19 Cl 24 pH 7.6 T/A 190
7/19 Cl 24 pH 8.0 T/A 170
7/20 Cl 12 pH 7.6 T/A 180 CYA 130 (12 must not have been right)
7/20 Cl 24 pH 8.0 T/A 180
7/20 Cl 24 pH 8.0 T/A 150
7/21 Cl 24 pH 8.0 T/A 210 (started using new Walmart Test kit.)
My new test kit doesn't have the Acid Demand Test I was using as a general guide about adding Muriatic Acid. I've been adding it 1 quart at a time, at least 8 - 12 hours apart. Am I doing everything I can be doing to lower this or am I just fumbling around in the dark making a bigger mess?
Robin
25,000 gallon in ground pool
vinyl liner, sand filter
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules