Results 1 to 10 of 10

Thread: first PS234 test

Threaded View

  1. #5
    duraleigh Guest

    Default Re: first PS234 test

    Hi, Sharon,

    The Cal-Hypo will not add stabilizer...it does add a little calcium which is fine for your pool.

    I put mine directly into the skimmer....pump running. Very dissolvable.

    If you put it in in the daytime, it will be quickly consumed by the Sun....very ineffective.

    Put it in the skimmer at dusk. Do not be surprised if it is completely gone next AM. In fact, you should test for FC tomorrow AM and be prepared to repeat the Cal Hypo next evening.

    5-10ppm is too innaccurate for your dosage. You must get to 10ppm to reach breakpoint (shock) level. My chart say 3.25 lbs of Cal Hypo will get your 25k pool to 10ppm.
    Last edited by duraleigh; 06-21-2006 at 04:25 PM.

Similar Threads

  1. PS234 Test
    By Bruce A in forum DPD-FAS based testing
    Replies: 3
    Last Post: 07-16-2006, 09:25 PM
  2. 1st Test with PS234 W/ copper test
    By JJSZABO in forum DPD-FAS based testing
    Replies: 4
    Last Post: 07-07-2006, 04:15 PM
  3. Necessity for ordering Salt Test in PS234 test kit
    By Scarlett in forum DPD-FAS based testing
    Replies: 4
    Last Post: 06-13-2006, 01:04 AM
  4. First test results with the PS234
    By metalman in forum DPD-FAS based testing
    Replies: 6
    Last Post: 05-26-2006, 11:20 PM
  5. First test with PS234
    By tbatti in forum DPD-FAS based testing
    Replies: 2
    Last Post: 05-13-2006, 12:04 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts