Help! 911 - algae showing up

[sw_stupid]

I got my kit and everything has gone well for about a week. This weekend, I noticed my ph looked to be about 8.0. I added some acid to bring it down. I think I added too much (1.5 gallons). Anyway, pH now seems to be back up to about 7.2 or 7.4. I have noticed I have some green algae trying to grow on the walls as well as a little cloudy water. The algae seems to be under the jets - maybe coincidental. Is it possible the pH change let some sort of algae start??? Here are my results:
FC = 6
CC = 0
pH = 7.4
ALK = 120
CAL = 120
CYA = 55
Salt = 3600
My initial thought was to shock (with bleach of course), but I have no CC and my FC is high enough for my CYA levels. I wouldn't freak out, but my wife is having her office party over here next weekend (July 1). I threw in a jug of bleach tonight for good measure - should bring it up to around 8.
Any suggestions?

[duraleigh]

I'd shock it. Cl up to around 17ppm in a vinyl pool...higher if your pool is plaster. Unusual that you have no CC's but seeing the algae would be good enough for me.

[sw_stupid]

What about the pH bouncing around? You think it contributed?

[duraleigh]

No. If I had to guess, I would surely guess there was a lack of Cl at some point that allowed it to start.

[sw_stupid]

I'll start shocking tomorrow. How low would you recommend it before I let the kids back in? Thanks again.

Dave to the rescue!!!

[Simmons99]

When the clorine is below 10ppm and the PH is within normal range.