-
Hi, Dave,
Lot's of good advice above.
Also, waterbear makes a good point about TSP. I read somewhere it could be used to lower CH as well. When I posted that info, Ben made a VERY CLEAR POINT not to use TSP because algae loves it sooooo much.
Keep reading and asking questions. You're on your way!
Dave S.
Last edited by duraleigh; 04-07-2006 at 07:58 AM.
-
Carl: The kit I got was the HTH 5 way test kit. It was $12.87 at Wal-Mart. Seems like a decent kit. After adding the shock last night, I measured the chlorine level this morning and it was reading about 5ppm (just using the quick test strip method, had to get the pool brushed before heading to work).
Should I start trying to raise the pH and TA along with the chlorine? I am a little confused about the pH reading being so low. I thought the pH should rise as the plaster cures. Or is the 5 gallons of acid originally added doing its job?
Thanks everyone for your inputs. I've only had water for 5 days and you all have already been a big help.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules