Thanks all. I will check out some of the companies websites.
I live in NJ, so we do get some nasty winters (except for this past winter). I suppose the panels could be stored in my shed to help protect them from the snow and ice.
Thanks all. I will check out some of the companies websites.
I live in NJ, so we do get some nasty winters (except for this past winter). I suppose the panels could be stored in my shed to help protect them from the snow and ice.
Here are a few pic's of mine....solarpanel1.JPG
solarpanel2.JPG
Thanks Roxy. That is a clean setup. I like it!
Very simple too....three sheets of pressure treated plywood, and a handful of two by fours. When I get around to it I would like to add some wheels to it, I lose a little sun in the morning and a little in the afternoon because of my shed. The wheels would allow me to move it back and forth the few feet I need to maximize my exposure.
Space WAS a factor for us so we manufactured a 40' post mount system that went up to just above rail height (52" pool) then ran at 45 degrees up another 60" - the posts are pvc (concreted in) with chickenwire overlay base for the panels to lay on - pvc runs across the top to connect them and there are 3 top to ground support posts off the back. This fits 4-2x20' panels or 2-4x20' panels. We currently have 3 2x20' panels plumbed into a diverter, will add a 4th or alternate panels if we need to, but it keeps our pool at 84-88 so far so don't have a need for more. It looks a bit like a pergolla. I have hooks to hang the pool cleaning tools and towel racks mounted to it.
Beats driving to the lake!
18'x33'x52" AG oval, hard plumbed system, 22" Pentair Meteor Filter 1.5hp pump, Goldline SWCG System, 2/4x20 SolarBear Panels, Biltmore Steps - 16x14' composite deck, Pool Rover Jr
FYI - I have harsh winters too (canada), there's no need to take them in, just drain them properly, I let mine drain for a day then blow them out with compressed air.
Bookmarks