+ Reply to Thread
Results 1 to 4 of 4

Thread: Polaris AutoClear ??

Hybrid View

  1. #1
    Join Date
    Nov 2004
    Location
    Tucson, AZ, USA.
    Posts
    15

    Default Re: Polaris AutoClear ??

    Quote Originally Posted by mlh
    Make sure that the microphone sensor is still stuck to the pump motor--It won't do anything without that in place-- you should see a small flashing dot at the bottom of the display. Also try unpluging it for a few minutes and then plugging it back in- It should reset it.

    Mike

    WTF is the microphone sensor?

    I just installed my autoclear plus (interfaced with my Polaris EOS) and it works great...Apparently my EOS needs a small software update to properly and fully interface with the autoclear, but it works fine..

    I see ZERO mention of a 'microphone sensor' in the installer guide..

    Just email or call polaris. Their customer service for me at least has been amazing....

  2. #2
    Join Date
    Dec 1969
    Location
    De Soto, Missouri, USA.
    Posts
    19

    Default Re: Polaris AutoClear ??

    It's a small sensor that attaches to the pump that tells the unit that the pump is running- has a wire that plugs into the Autoclear panel. This is only my 2nd season with this unit and while its just the basic model I would think they still use them.

    Mike

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts