Autopilot Question

[CHParker]

I have an Autopilot LS1000. On the output knob there is a metal sticker with the line which indicates which number is selected. The sticker has come off. How do I know where the line should be on the knob? There are two little screw hole on the knob. Do either of these line up with the indicator?

Thanks in advance.

[Poolsean]

Dial it so that the set screws are in the 9 o'clock and 12 o'clock positions. The unit will then be set on 0 output. Use a Sharpie and make a mark on the 0 position.

[CHParker]

Thank you!