+ Reply to Thread
Results 1 to 8 of 8

Thread: Am I being had?

Hybrid View

  1. #1
    kathgilliam is offline ** No working email address ** kathgilliam 0
    Join Date
    Dec 1969
    Location
    Jersey Village, Texas
    Posts
    34

    Default Re: Am I being had?

    I don't believe I burned up the pump. It still runs. This man's contention is that when I run it, it will leak at the seal between the pool basket and the pump.

    As soon as I get the pool filled, I will rinse the filter, start the pump, add new DE and let it run and we will see what happens.

    The filter basket is just fine, exactly as it was when I cleaned it earlier in the day.

    See pictures of my pool plumbing and the joint to which the pool guy is referring.

    K
    Attached Images
    Last edited by kathgilliam; 07-24-2006 at 04:47 PM. Reason: Added pictures and information

  2. #2
    Join Date
    Jun 2006
    Posts
    47

    Default Re: Am I being had?

    I had to fix the pipe coming from my pump too. Mine looks slightly different though. My pipe screws on and off. I just re-wrapped the threads with plumbers tape and the leaking stopped.

    As far as the 1hp motor, just make sure it works and doesn't make weird noises. One hp is fine. And as far as the old DE filter... If it filters then it is fine. Just my opinion.

  3. #3
    Join Date
    Dec 1969
    Location
    Ft Lauderdale, Fl
    Posts
    657

    Default Re: Am I being had?

    Oh poppycock. I see the problem...it's that horizontal round thingie with the purple band and umbilical cord hanging off of it. The one along the right side of the first photo!

    just kiddin.

    The red handled ball valves should be for your skimmer and suction cleaner lines (or second skimmer?). The black diverter valve will adjust between the bottom main drain and the red handled ball valves.
    Looks like the outlet side of the pump is going between the inlet of your Polaris' booster pump (the smaller line) and up to your multiport valve on your filter. From there, it will plumb to a drain (waste) line and to your return. In this case it's going over to your salt generator cell (the poor "attempt" at humor earlier), then back to your pool.

    It doesn't look bad. The pump joint doesn't look bad either. Other than the tightness of the plumbing, if there need to replumb, there's nothing that should be a problem.
    Sean Assam
    Commercial Product Sales Manager - AquaCal AutoPilot Inc. Mobile: 954-325-3859
    e-mail: [email protected] --- www.autopilot.com - www.aquacal.com

  4. #4
    kathgilliam is offline ** No working email address ** kathgilliam 0
    Join Date
    Dec 1969
    Location
    Jersey Village, Texas
    Posts
    34

    Default Re: Am I being had?

    I LOVE YOU GUYS!!!!!!!!!!!

    Cross your fingers for me to have good luck tonight. If I do, I think I may just call this gentleman and ask him for an invoice for his time so far. I'll be posting new test results soon for your expert recommendations.

    Kath

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts