+ Reply to Thread
Results 1 to 10 of 19

Thread: anyone have any experience with the Skim Shark?

Hybrid View

  1. #1
    leejp is offline Registered+ Thread Analyst leejp 0
    Join Date
    Dec 1969
    Location
    Upstate, NY (Dutchess County)
    Posts
    119

    Default Re: anyone have any experience with the Skim Shark?

    Quote Originally Posted by jabre
    leejp, please post your experience with the Poolskim when you get it! I agree, it looks worth the try. Thanks for volunteering to be the one on the forum to shell out the $60 to try it out :-)
    Will do...

    You'll have to wait until the end of May though... that's when the cover comes off here in Upstate, NY (after most of the pine needles and the norway maple spinners have come down).
    26,000 Vynil Liner L Inground
    Hayward 1HP Superpump + Hayward Pro Grid 4800 DE Filter
    Poolvergnuegen thepoolcleaner Pressure Side Cleaner
    Loop-Loc Mesh cover

  2. #2
    waldreps is offline Registered+ Thread Analyst waldreps 0
    Join Date
    Dec 1969
    Location
    Lake Park, MN, USA.
    Posts
    70

    Default Re: anyone have any experience with the Skim Shark?

    Thanks for the suggestion. I'm also interested in your results. I only have one skimmer in my 18x36 inground pool and it has a hard time keeping up. I'm looking for something to supplement it.

    I don't think the skim shark actually sucks the debris. I think it just moves around and the debris ends up in the "mouth" of the shark. So the battery power just causes it to "swim" around. I'll wait for your results though on the pool skim. Thanks.

  3. #3
    Join Date
    Nov 2004
    Location
    Winter Springs, FL
    Posts
    23

    Default Re: anyone have any experience with the Skim Shark?

    Then, there is the Polaris LCS. See it at http://www.polarispoolsystems.com

    Look under accessories, then LCS.

    I have one (also a Pool Devil and wll probably get a Poolskim, too - I am desperate for more skiming action) and the results are still out. It goes on the line for a suction cleaner and needs the cleaner to move it around the pool. I found that my 1.5hp pump would not drive the LCS and Hayward Navigator enough to get very effective action. Since the LCS is on the line before the Navigator, it reduces the suction to the cleaner. There is an ajdjustment, but I have found I do not have enough power to effectively drive both. I will be swapping my 1.5hp for a 2hp soon, so maybe it will improve.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts